By – Pass Relief Valve
SPECIFICATIONS:
- Application : to keep reqular pressure in pipeline against over-pressure
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Working differential pressure : 0.49MPa
- Adjustable range of differential pressure : 0.29 ~ 0.78MPa
- Fluid : L.P.G, NG, NH₃
- Size : 40A
Second Stage Regulator
MODEL CAPACITY (kg/h) INLET-PRESSURE (MPa) OUTLET SETTING PRESSURE (P2) OUTLET PRESSURE (MPa) WORKING TEMPERATURE (°C) CONNECTION INTERVAL (mm) APPLICATION INLET OUTLET HYRM-10A Max 15 Max 1.56 * 0 ~ 0.2 * Pol Handle, LH W22.5 x 14T Hose end 172 Industrial HYRM-35A Max 150 0.16-0.24 Mpa -20 ~ 60 PT 3/4 PT 3/4 106 HYRM-60A …
Continue reading Second Stage Regulator
First Stage Regulator
MODEL CAPACITY (kg/h) INLET-PRESSURE (MPa) OUTLET-PRESSURE (MPa) LOCK-UP PRESSURE (MPa) CONNECTION INTERVAL (mm) APPLICATION INLET OUTLET HYRM-35 35 0.10~1.56 0.057~0.083 0.095 PT 3/4B PT 3/4B 106 Industrial HYRM-60 60 134 HYRM-100 100 PT 1B PT 1B 108 HYRM-200 200 PT 1-1/2B PT 1-1/2B 129 HYRM-300 300 HYRM-400 400 PT 2B PT 2B 130
Flanged Globe Valve (20k)
SPECIFICATIONS:
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Fluid : L.P.G, NG, NH₃
- Size : 15, 20, 25, 40, 50, 65, 80, 100A
Check Valve Angle Type Globe
SPECIFICATIONS:
- Application : to prevent the gas leakage in tank when klingertype level gauge was dastroyed.
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Maximum working pressure : 2.54Mpa
- Fluid : L.P.G, NG, NH₃
Y-Type Globe Valve
SPECIFICATIONS:
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Y-valve & coupling assembly test pressure : 2.35MPa
- Fluid : L.P.G, NG
- Size : 25, 50A
Flanged Check Valve (20k)
SPECIFICATIONS:
- Application : to prevent back – flowing
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Fluid : L.P.G, NG, NH₃
- Size : 25, 40, 50, 65, 80, 100A
Flanged Sreainer (20k)
SPECIFICATIONS:
- Hydrostatic test pressure : 2.94MPa
- Pneumatic test pressure : 1.96MPa
- Screen size : 60 mesh
- Fluid : L.P.G, NG, NH₃, steam
- Size : 15, 20, 25, 40, 50, 65, 80, 100A
Control Unit ND-213
| Type | Immediate alarm type, Combustible catalytic sensor type, Explosion-proof type |
| Power | AC 220V/60Hz |
| Battery | DC18V, 600mAh, Ni-Cd |
| Gas type | LPG, LNG, Town gas(Heavy),Town gas(light) |
| Power consumption | 8W(3circuit) |
| Detecting range | LEL 0~100 |
| Density to alarm | LEL 20 |
| Alarm sign | LED yellow light and buzzer sound |
| Breakdown | LED red light |
| Reset method | Automatic |
| Output | Voltage signal : 12V Current signal : 4~20mA Contact signal : COM, NO, NC(250V,3A) |
| Use place | Boiler room, factory, Gas store room, other gas facilities |
| Operating Temp. & Hum. | -20℃~50℃, Under 95%(RH) |
Shut off part SV-20
| MODEL | SV-20 |
| Shut off Method | Geared Motor |
| Standard Valve | 15A, 20A, 25A |
| Voltage | DC12V±/500mA±30% |
| Current | Min 200㎃, Max 500㎃ |
| Manual operation | Clutch push method |
| Torque (Kgf·cm) | 65 |
| Operating Temp. & Hum. | -20~50℃, under Rh95% |
| Open/Close speed | Within 10 seconds |
| Dimmensions(mm) | W110 × H165 × D75 |
| Weight (g) | 674 |
ND-104
| Type | Single type, Immediate alarm type, Exposed type, Combustible catalytic sensor type |
| Power | AC220V 60Hz |
| Gas type | LPG, LNG, Town gas(Heavy),Town gas(light) |
| Power consumption | 3.6W |
| Density to alarm | LPG, Town gas(Heavy): 0.06~0.45% LNG, Town gas(light): 0.06~1.25% |
| Alarm sign | LED yellow light and buzzer sound |
| Reset method | Automatic |
| Alarm output | DC 10V |
| Use place | Home use |
| Operating Temp. & Hum. | -20℃~40℃, Under 95%(RH) |
| Weight(g) | 220 |
| Dimensions(mm) | W70 X H110 X D37 |